Honeywell Dolphin 70e Black User Manual page 21

Option 1: Charging from a power outlet
Use only a UL Listed power supply, which has been qualified by Honeywell with an output rated at 5VDC
and 1A with the device.
USB Door
Right Side Panel of
Dolphin 70e Black
2
USB Charge/Communication
Cable
Option 2: Charging from a high power USB port on a host device (PC)
Charging the battery through a USB port takes more time than direct charging using the provided power
supply. Inadequate source current may lengthen the charge time or prevent the battery from charging if
the terminal is drawing more current than supplied by the USB port. The maximum current supplied by a
USB Host can vary from 100mA to 500mA. Do not attempt to charge the terminal from a 100mA
source. An active Dolphin terminal uses more current than supplied by a 100mA source causing the
terminal to continue to draw power from the battery. See
additional information.
Note: Placing the terminal in Suspend mode while charging reduces the current draw of the terminal and shortens
the charging time of the battery.
Touch > Settings
USB Door
2
USB Charge/
Communication Cable
1
> Battery to verify the battery is charging.
1
Micro
USB
Port
Micro USB Port
3
Important Charging Guidelines
Right Side Panel of Dolphin 70e Black
3
5
Plug Adapter
Power Adapter
on page 3-13 for
USB Port on Host Device
4
2 - 5