General Maintenance After The Application Of Spray Tanning Solution - Norvell PRESTIGE 2100 Instruction Manual And Users Manual

PRESTIGE 2100
•
Forget to exfoliate? Pressed for time?
We recommend using our eXmitt® Pre-tan Body Buff to instantly clear away any dead
skin cells, clean the skin of any barriers, and balance the pH level of the skins surface.
Infused with our proprietary pH balancing formula, the eXmitt® is designed to gently
exfoliated and buff the skin while accelerating DHA color development without the
need for water.
8. General maintenance after the application of spray
tanning solution
•
Once dry, apply Post Sunless HydroFirm™ Moisturizing Spray to add moisture, seal
sunless results and boost the DHA reaction.
•
You should refrain from showering as long as possible (up to 24-hours). As with all
DHA products, sunless color begins showing development approx. 4-hours after
application and continues to darken for up to 24-hours.
•
If you must shower during the 4 to 24-hours following the application, WARM
WATER RINSE ONLY. The use of soap can inhibit the full development of DHA color.
•
Important: Cosmetic instant bronzers will wash away during the first shower. Pools
and spas that utilize chlorine can cause fading.
•
When showering after 24-hours, use only a mild pH balancing shower gel such as pH
Balancing Shower Cleanser™. Refrain from using scrubs or high pH soaps as these
will strip away your sunless color.
•
Extend and build color between sessions with a daily application of Color Extending
Pro-Long™ moisturizer.
Need Touch-ups? Use Bronzing 4-Faces™ or any other Norvell® self-tanning product
between full sessions.
NOTE: The tips listed herein are instructions to achieve the very best sunless
i
tanning results; however, you can still achieve beautiful just off the beach™
color as a Norvell® walk-in client.
US
7