Start-Up - Norvell PRESTIGE 2100 Instruction Manual And Users Manual

US

9. Start-up

Before connecting to the power supply, be
sure that the supply voltage is identical with
the value given on the rating plate.
Always lower the carry handle in the cover
before opening the cover. Press the locking
device on both sides to this purpose.
1. Open the closure (Fig. 2, 1) and fold open
the cover of the device.
2. Open the air hose retainer (Fig. 2, 2).
3. Remove the air hose and connect it to the
air hose connection (Fig. 3).
4. Close the air hose retainer again.
5. Unroll the power cord and slide the cord
grommet into the provided recess (Fig. 4)
WARNING: DO NOT close the
cover if the cord grommet is
not positioned correctly. The
power cord could otherwise be
damaged!
6. Remove the spray attachment from the
deposition tray.
7. Unscrew the container from the spray
attachment.
8. Prepare spray tanning solution according
to manufacturer's instructions and pour
into the container.
9. Screw the container firmly onto the spray
attachment.
10. Connect the front part of the gun and the
gun handle to each other. (Fig. 5)
11. Close the device cover and pull the carry
handle upwards. This makes the gun
holder accessible.
12. Put the spray gun onto the gun holder at
the turbine.
13. Place the turbine only on a clean, flat
horizontal surface. Otherwise, the turbine
may suck in dust, etc.
8
PRESTIGE 2100
2
3
4
5
2
1