Cleaning The Spray Tanning System - Norvell PRESTIGE 2100 Instruction Manual And Users Manual

PRESTIGE 2100

13. Cleaning the spray tanning system

Clean the Spray Tanning System as required at the end of the working day. Dried
i
spray tanning solution makes cleaning more difficult and can even damage
the system.
1) Turn the system off.
2) Divide the spray gun. Press the hook
(Fig. 11 "click") slightly downwards.
Turn the gun front part and gun rear
part against each other.
WARNING: NEVER hold the gun
handle under water or immerse it
into liquids. Clean the housing only
with a moistened cloth.
3) Unscrew the container.
4) Pour any remaining spray tanning
solution back into the original packaging.
5) Clean the container and feed tube with
a brush.
6) Clean the ventilating bore (Fig. 12, 1).
7) Pour water into the container. Screw
the container back on.
DO NOT use flammable materials for
cleaning purposes.
8) Assemble the gun again.
9) Turn on the system and spray the water
into a sink or a cloth.
10) Repeat the above procedure until the
water emerging from the nozzle is clear.
11) Turn off the system and divide the spray
gun.
12) Screw off the container and empty it. Pull
out the feed tub with container seal.
CAUTION! NEVER clean seals, nozzles or
air holes of the spray gun with
metal objects.
13) Unscrew the union nut and remove the
air cap and nozzle (Fig. 13). Clean the air
cap, nozzle seal and nozzle with a brush
and water.
11
12
1
13
US
CLICK
11