Maintenance - Norvell PRESTIGE 2100 Instruction Manual And Users Manual

US
14) Clean the outside of the spray gun and
container with a cloth soaked in water.
15) Assemble the parts again (see
"Assembly").
Assembly
1) Slide the nozzle seal (Fig. 14, 1) with the
groove (slot) facing forwards into the
nozzle (2).
2) Put the nozzle onto the gun body and
find the correct position by turning it.
3) Put the air cap onto the nozzle and
tighten it using the union nut.
4) Place the container seal (Fig. 15, 1) from
below on the feed tube (2) and slide
it over the collar, while turning the
container seal slightly.
5) Insert the feed tube with container seal
in the gun body.

14. Maintenance

Important! NEVER operate the system
without the air filter; dirt could
be sucked in and interfere with
the function of the system.
DO NOT store any objects in
the air filter compartment.
1) Change the air filter if it is soiled (check
daily).
2) Open the cover of the air filter
compartment (Fig. 16).
3) Insert a new air filter into the
compartment.
4) Close the cover of the air filter
compartment.
In order to mount the gun more easily
apply lubricating grease (enclosed)
liberally to the O-ring at the spray
attachment (Fig. 17, 1) and to the O-ring
of the plug connection of the air hose (Fig.
17, 2).
12
PRESTIGE 2100
14
15
2
1
16
17
2
1
1
2