I cannot connect to my Jetpack.
Make sure the Network Signal Strength indicator displays at least one bar and that the type
•
of network is displayed on the device Home page.
Make sure your Windows Wi-Fi adapter/Mac AirPort is turned on. (Refer to your computer's
•
Help if you need assistance.)
➊
Open your wireless network connection list:
Windows: Right-click icon and select View Available Networks.
Mac: Pull down list from AirPort icon.
➋
Windows: Click Connect.
Mac: Select the network name.
When your device is connected to the network, the Connected Devices icon in the status bar
will show a connected device.
I see the network name but cannot connect to my Jetpack.
Go to Wi-Fi Name/Password to check that you are using the correct Wi-Fi password.
•
How do I disconnect from the network?
From the Jetpack device:
➊
To disconnect from the Wi-Fi network, select Settings > Wi-Fi > Turn Off.
From the Jetpack Admin network:
➊
Go to
http://my.jetpack
➋
Sign In using your Web Interface password.
➌
Click Sign Out.
How can I find out how many users are connected to my Jetpack?
From the Jetpack device:
Check the Connected Devices icon in the status panel on the Home page of your Jetpack. The
•
number of connected devices is displayed to the right of the icon.
to open the My Jetpack Home page.
111