OHAUS Aviator 5000 Operator's Manual page 12

3.2.2
0 ... 9
0 ... 9
3.2.3
0 ... 9
M1
12
Operator Manual Aviator 5000
OHAUS
Calling up PLUs
Depending on the setting of operator setup Step 7, there are two ways
to call up PLUs.
Calling up via PLU key (factory setting, operator setup Step 7 = OFF)
1. Place the item on the scale.
2. Enter the corresponding PLU number and press the PLU key.
Unit price and price to pay are displayed.
3. Remove the item from the scale.
All displays return to 0.
Calling up PLU automatically (operator setup Step 7 = ON)
1. Place the item on the scale.
2. Enter the corresponding PLU number.
The PLU is called up automatically.
Unit price and price to pay are displayed.
3. Remove the item from the scale.
All displays return to 0.
Using PLU preset keys
You can save the most important PLUs to the keys in the left-hand
key field.
Storing a PLU to a preset key
1. Enter the unit price (price/kg) or recall PLU.
2. Press and hold the desired preset key, e.g., M1, until a long beep
can be heard.
Two short beeps indicate that the data has been stored.
Order number 72246393 12/10