Hammer Strength OHDPR9 Assembly Instructions Manual page 9

FIGURE 6
6
23
26 1/2 X 4-1/4"
STEP 6:
• LOOSELY assemble the WEIGHT HORN UPRIGHTS (6) to the LEFT & RIGHT UPRIGHT BASE (1 & 2) using four 1/2 X 4-1/4" BOLTS
(26), four 1/2" PLASTIC DOME WASHERS (22), four 1/2" INT TOOTH LOCK WASHERS (20) and four 1/2" LOCK NUTS (23) as
shown in FIGURE 6.
• LOOSELY assemble the WEIGHT HORN UPRIGHTS (6) to the REAR UPRIGHTS (4) using four 1/2 X 4-1/4" BOLTS (26), four 1/2"
PLASTIC DOME WASHERS (22), four 1/2" INT TOOTH LOCK WASHERS (20) and four 1/2" LOCK NUTS (23) as shown in FIGURE
6.
6
20
22
1/2 X 4-1/4" 26
4
23
20
22
1
4
2
9