Hammer Strength OHDPR9 Assembly Instructions Manual page 4

FIGURE 1
STEP 1:
• LOOSELY assemble the REAR UPRIGHT (4) to the LEFT UPRIGHT BASE (1) using two 1/2 X 4-1/4" BOLTS (26), two 1/2" PLASITC
DOME WASHERS (22), two 1/2" INT TOOTH LOCK WASHERS (20) and two 1/2" LOCK NUTS (23) as shown in FIGURE 1.
• LOOSELY assemble the REAR UPRIGHT (4) to the RIGHT UPRIGHT BASE (2) using two 1/2 X 4-1/4" BOLTS (26), two 1/2" PLASITC
DOME WASHERS (22), two 1/2" INT TOOTH LOCK WASHERS (20) and two 1/2" LOCK NUTS (23) as shown in FIGURE 1.
4
23
20
1
22
26 1/2 X 4-1/4"
4
4
2