Specifications - NEC FP1355 Service Manual

Specifications

Monitor Specifications
Picture Tube
Viewable Image Size:
Input Signal
Display Colours
Synchronization Range
Resolutions Supported
Resolution based on horizontal and
vertical frequencies only
Active Display Area
(Factory setting)
Active Display Area
(Full scan)
Power Supply
Current Rating
Dimensions
Weight
USB connection
MultiSync FP1355
Diagonal: 55 cm/22 inch
508 mm/20 inch
Video: ANALOG 0.7 Vp-p/75 Ohms
Sync: Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. (Positive/Negative; TTL Level)
Sync on Green video (Positive) 0.7 Vp-p and sync (Negative)
0.3 Vp-p
Analog input: Unlimited number of Colours
Horizontal: 30 kHz to 121 kHz
Vertical: 50 Hz to 160 Hz
640 x 480 @ 60 to 160 Hz
800 x 600 @ 50 to 160 Hz
832 x 624 @ 50 to 160 Hz
1024 x 768 @ 50 to 144 Hz
1280 x 1024 @ 50 to 110 Hz
1600 x 1200 @ 50 to 95 Hz.....
1800 x 1350 @ 50 to 85 Hz
1800 x 1440 @ 50 to 80 Hz
1856 x 1392 @ 50 to 82 Hz
1920 x 1440 @ 50 to 80 Hz
2048 x 1536 @ 50 to 80 Hz
Horizontal: 396 mm/15.6 inches
Vertical: 297 mm/11.7 inches
406 mm/16.0 inches
305 mm/12.0 inches
AC 100-120/220-240 V @ 50/60 Hz
1.4 A @ 100-120 V, 0.7 A @ 220-240 V
495 mm (W) x 494 mm (H) x 473 mm (D)
19.5 inches (W)x 19.4 inches (H)x 18.6 inches (D)
29.7 kg
65.5 lbs
1 upstream, 3 downstreams, USB Vers. 1.1
self powered hub, 500 mA per 1 downstream port
English-14
Notes
90° deflection, 0.24 mm grill
pitch, medium short
persistence phosphor,
aperture grille CRT,
multi-layered, anti-static
screen coating, semi-dark-tint
screen and OptiClear screen
surface.
Depends on display card
used.
Automatically
Automatically
Some systems may not
support all modes listed.
NEC-Mitsubishi Electronics
Display cites recommended
resolution at 85 Hz for optimal
display performance.
Dependent upon signal timing
used, and does not include
border area.
Dependent upon signal timing
used, and does not include
border area.
➙➙➙