Brightness/Contrast Controls - NEC FP1355 Service Manual

Controls
OSM (On-Screen Manager) control buttons on the front of the monitor
function as follows:
To change DVI/D-SUB signal input, press the RESET button.
NOTE: OSM must be closed in order to change DVI/D-SUB signal
input.
EXIT
CONTROL L/M
CONTROL -/+
PROCEED
D-SUB/DVI-A
RESET
NOTE: When RESET is pressed in the main and sub-menu, a
warning window will appear allowing you to cancel the reset
function.
When OSM controls are activated, icons are displayed at the top of the
menu. If an arrow (¡) is displayed in a sub-menu, it indicates further
choices are available. To enter a sub-menu, press PROCEED.

Brightness/Contrast Controls

Brightness: Adjusts the overall image and background screen
brightness.
Contrast: Adjusts the image brightness in relation to the background.
Main Menu
Exits the OSM menu.
Moves the highlighted
area up/down to select
one of the controls.
Moves highlighted area
left/right to select one of
the controls.
Has no function.
Without OSM menu
screen, push to select the
signal input connector,
D-SUB or DVI-A.
Resets all the controls
within the highlighted
menu to the factory
setting.
English-7
Sub-Menu
Exits to the OSM main menu.
Moves the highlighted area
up/down to select one of the
controls.
Moves the bar in the - or +
direction to decrease or
increase the adjustment.
Only executes control or
enters sub-menu.
Resets the highlighted control
to the factory setting.