Alarms; Alarm Display During Camera Live Picture Viewing; Alarm Display During Vcr Playback - Sanyo MPX-CD16P Instruction Manual

Table of Contents

Advertisement

ALARMS

English

Alarm Display During Camera Live Picture Viewing

When inputs such as a door bell, an interphone, etc., are connected to the
CONTROL terminal, they will send alarm triggers automatically. On the monitor
screen, "A" will flash instead of the camera number, and the camera indicator, and
depending on the alarm setup (zoom or still), the corresponding button indicator will
flash.
While the camera indicator is flashing, press the SELECT button for full screen
display of the camera live picture corresponding to the alarm trigger.
When an alarm trigger is received, the following will take place.
If in sequence display or full screen display, the display mode will automatically
switch to split screen display.
Even if the power to this unit is turned off, if the monitor is turned on, the power
to this unit will be turned on automatically and the display will switch to split
screen display. After the alarm operations, the unit will be turned off
automatically if no button has been pressed (like pressing the SELECT button
to switch from split screen to full screen display), during the alarm operations.
NOTE:
The alarm operations cannot be cancelled. Please wait until the alarm operation is finished.
Setup Example
The buzzer will ring for about 30 seconds, and the image of the
corresponding camera will be zoomed in and freezed.
The ZOOM, STILL and corresponding camera indicators will flash. After 30 seconds,
everything will return to the mode previous to the alarm trigger.
NOTE:
When the items MONITOR1 ZOOM and STILL have been set to "ON", the display mode will
not switch to full screen display.
For the operation when the RETRIGGER line is set to "ON", please refer to
"Alarm Settings" on page 10.

Alarm Display During VCR Playback

When playing back a camera recording, press the VCR button, then rewind the
tape in the VCR and start playback.
When reaching an alarm signal during playback, "A" will flash on the monitor
instead of the camera number.
NOTE:
When reaching an alarm signal during playback, the display will automatically switch to 16
divisions split screen display. The corresponding camera indicator will light.
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mpx-md16p

Table of Contents