Table of Contents
Advertisement
CLOCK, TITLE DISPLAY
1
Press the MENU button, then press the O button to
select "4. DISPLAY SET" and press the MENU
button again.
2
Press the + (or –) button to select "ON" for "LIVE
CLOCK", then press the m button.
3
Press the O button to set the clock display position,
then press the m button.
Press the O button to select "LIVE TITLE", then
press the + (or –) button to select "ON" or
"OFF" as desired.
Refer to "Display Settings" below, then following
the same procedure, set "VCR PB CLOCK", "VCR
PB TITLE", "MON1 SEQ. TIMER", "MON2 SEQ.
TIMER" and "MONITOR2Ü MONITOR1" as desired.
NOTE: If the displays on the monitor overlap each
other, cancel the timelapse VCR display.
4
Press the MENU button, then press the O button to
select "7. ENTER" and press the MENU button
again.
Display Settings
LIVE CLOCK
ON: The clock is displayed when the signals from a camera
are displayed. (To set the clock, please refer to "CLOCK
SETUP".)
OFF: The clock is not displayed when the signals from a
camera are displayed.
LIVE TITLE
ON: The title is displayed when the signals from a camera
are displayed. (To set a title, please refer to "TITLE
SETUP".)
OFF: The title is not displayed when the signals from a
camera are displayed.
VCR PB CLOCK
ON: The clock is displayed when the signals from the VCR
playback are displayed.
OFF: The clock is not displayed when the signals from the
VCR playback are displayed.
English
VCR PB TITLE
ON: The title is displayed when the signals from the VCR
playback are displayed.
OFF: The title is not displayed when the signals from the VCR
playback are displayed.
MON1 SEQ. TIMER
0.5 to 30 SEC (in 0.5 sec increments): The timing of the
sequential display on monitor 1.
MON2 SEQ. TIMER
0.5 to 30 SEC (in 0.5 sec increments): The timing of the
sequential display on monitor 2.
MONITOR2 ← MONINTOR1
To have the same display on monitor 2 as the one on
monitor 1.
11
Menu 4
Advertisement
Table of Contents
