Displaying Eeprom Data - Canon BJC-55 Service Bulletin

Part 3: Operating Instructions

3.6.3 Displaying EEPROM data

0 %
Purge Unit Side
The EEPROM contains the total waste ink amount and the total number of pages fed,
which are counted while the printer is used. This data is useful to know the
frequency of use of the printer.
1. Remove the lithium ion battery.
2. While holding down RESUME button, insert the DC plug of the Universal adapter
into the Universal adapter connector of the printer.
3. While holding down the RESUME button and the CARTRIDGE button, press the
POWER button until one long and short beeper sounds.
Every time the CARTRIDGE button is pressed, a beeper sounds. When the RESUME
button is pressed after the beeper sounds 13 times (i.e. pressing the cartridge
button 13 times), release the button and set a sheet of paper in the manual paper
feeder to start printing the EEPROM setting list.
Printer Base Unit
25 %
Waste Ink
Figure 3-19 Waste Ink Absorber (50% Used Sample)
50 % 75 %
Ink Absorber
3-24
BJC-50
100 %
Replacement