Cleaning - Honda 1982 GL1100 INTERSTATE Owner's Manual

Ignition switch
Steering lock
Handlebar switches
2. After cleaning, rinse the motorcy
thoroughly with plenty of clean wa
Strong detergent residue can co
alloy parts.
3. Dry the motorcycle,
ahd let it run for
Braking performance may be
im
immediately after washing the
tn()
cye/e.
4. Test the brakes before riding the m
cycle in traffic. Several applica
may be necessary to restore n
braking performance.
Clean your motorcycle regularly to protect
the surface finishes and inspect for damage,
wear, and oil or hydraulic fluid seepage.
1. Clean
the windshield with a soft
cloth or sponge and plenty of water.
Dry with a soft clean cloth. Remove
minor scratches with commercially
available plastic polishing compound.
Replace the windshield
if
scratches
cannot be removed and they obstruct
clear vision.
CAUTION:
... Do not let battery electrolyte or other
acid chemicals get on the windshield.
They will damage the plastic.
... A void spraying high pressure water
(typical in coin-operated car washes) at
the [olio wing areas:
Brake master cylinders
Radiator fins
Wheel hubs
Muffler outlets
Top compartment
Under seat
76
- - - - - - - - - - - C L E A N I N G - - - - - - - - _