Honda 1982 GL1100 INTERSTATE Owner's Manual page 54

gauge inserts easily. tighten the nuts on
the right axle holder to 30-40 N·m
(3.0-4.0 kg-m, 22-29 ft-lb) starting
with the forward nut.
6. If the feeler gauge cannot be inserted
easily, move the fork leg outward until
the gauge can be inserted and tigh ten
the holder nuts (4) with the gauge
inserted. After tightening, remove the
gauge.
(8) Feeler gauge
on
7. Check that the other three corners
the caliper holder (6) have a clea
of at least 0.7mm (0.028 in) bel
caliper holder and disc.
8. After installing the wheel, apply
brakes several times and check
free wheel rotation when released.
1
1
f'd;!i1i
H
fi
*
Failure
to
provide adequale dis
caliper holder clearance may damag
brake discs and impair braking elf'
cy.
*
If a torque wrench was not us
inslallation. see your authorized
dealer as soon as possible
10
proper assembly.