Honda 1982 GL1100 INTERSTATE Owner's Manual page 66

(2)
O-rings
(I)
Filter element
2. Insert a
n~
oil filter element. Ch
that the O-rings are in good condi
and that all parts·are installed as sho
3.
Install the oil filter cover and ti
the oil filter bolt.
Oil Filler Bolt Torque:
27-33
N·m
(2.7-3.3
kg-m,
20-24 II
4. Perform steps 4 to 6 of Engine
Change.
4. Fill the crankcase with approximately
3.2
liters
(3.4
U.S. quarts) of the recom-
mended grade oil and install the oil filler
cap.
5. Start the engine and let it idle for a
few minutes.
6. Stop the engine. Make sure the oil
level is at the upper level mark and
there are no oil leaks.
NOTE:
When running in very dusty conditions,
oil changes should be performed more
frequently than specified in the main-
tenance schedule.
62
OIL FILTER
NOTE:
*
Change the oil filter after draining
engine oil.
I. Remove the oil filter bolt, and pull
the oil filter element
(I)
out of the
oil filter cover.