Identification Data; Joints With Screw Clamps - MOTO GUZZI 2005 Griso 1100 Use And Maintenance Book

1

IDENTIFICATION DATA

It is a good rule to report the frame and
engine numbers in the space provided in
this manual.
The frame number must be quoted when
purchasing spare parts.
NOTE
Altering a vehicle identification
numbers is illegal and punished by the law
with fines and imprisonment. In addition,
altering the frame number invalidates the
warranty.
FRAME NUMBER
The frame number (1) is stamped on the
right side of the steering tube.
Frame no. ________________________
2
ENGINE NUMBER
The engine number (2) is stamped on the
left side close to the oil level plug.
Engine no. ________________________

JOINTS WITH SCREW CLAMPS

CAUTION
Remove ONLY the clamps indicated in
the maintenance procedures.
This text is not to be intended as an
authorisation to arbitrarily remove the
clamps present on the vehicle.
WARNING
Before removing a clamp, determine
whether removal may lead to leakage
and, if so, take adequate measures to
p r e v e n t l e a k a g e a n d p r o t e c t t h e
components positioned near the joint.
SCREW CLAMPS
For removal and installation it is sufficient
to use a common screwdriver.
CAUTION
Check the conditions of the clamp and
if necessary replace it with a new one of
t h e s a m e t y p e a n d d i m e n s i o n s ,
available on request from Moto Guzzi
Authorised Dealers.
When tightening the clamp, make sure
that the joint is sufficiently stable.
use and maintenance Griso
55