MOTO GUZZI 2005 Griso 1100 Use And Maintenance Book page 19

Code recovery
This function is used when the old code is
not available and you need to change it. In
this case it is necessary to insert at least
two keys in the ignition switch. The first key
is already inserted, a second key is
requested with the message:
"INSERT THE 2nd KEY"
The instrument panel remains on in-
between these two keys; if the second key
is not inserted within 20 seconds the
operation is aborted. When the second key
i s a c k n o w l e d g e d , t h e n e w c o d e i s
requested with the message:
"INSERT THE NEW CODE"
Once the operation is over, the display
goes back to DIAGNOSIS menu. If you
entered with the code, this operation will
not be allowed.
Once the operation is over, the instrument
panel goes back to SETTINGS menu.
LAP TIMER
When confirming LAP TIMER selection
[pressing SET button (3) for several
s e c o n d s ] t h e f o l l o w i n g o p t i o n s a r e
displayed:
√ EXIT
√ VIEW TIMES
√ DELETE TIMES
View times
This function also displays the acquired lap
times. Briefly press the SET button (3) to
scroll the pages with the times measured;
press it for several seconds to set the
display to LAP TIME menu. If the battery is
disconnected, stored times are lost.
Delete times
This function deletes the acquired lap times.
Deletion should be confirmed. Once the
operation is over, the display goes back to
LAP TIMER menu.
DIAGNOSIS
This function interfaces with the systems
fitted to the motorcycle to carry out
diagnosis. To enable it, you need a special
password only available to the Moto Guzzi
Authorised Dealer.
LANGUAGE
This function allows you to choose the
language of any message displayed.
Available options are:
√ ITALIANO
√ ENGLISH
√ FRANCAIS
√ DEUTSCH
√ ESPAGNOL
Once the operation is over, the display
goes back to LANGUAGE menu.
use and maintenance Griso
19