For Safe Operation - Zenoah LRT2300 Owner's Manual

LRT2300

5. For safe operation

1. Read this manual carefully
2. Keep this manual handy so
3. Always be sure to include this
4. Never allow children or any-
WORKING CONDITION
1. When using the product, you
should wear proper clothing and
protective equipment.
(1) Helmet
(2) Ear protectors
(3) Protection goggles or face
(4) Thick work gloves
(5) Non-slip-sole work boots
2. And you should carry with you.
(1) Attached tools
(2) Properly reserved fuel
(3) Spare blade
(4) Things to notify your working
(5) Whistle (for collaboration or
(6) Hatchet or saw (for removal of
3. Do not wear loose clothing, jew-
elry, short trousers, sandals, or go
barefoot. Do not wear anything
which might be caught by a mov-
ing part of the unit. Secure hair so
it is above shoulder length.
WORKING CIRCUMSTANCE
1. Never start the engine inside a
closed room or building. Exhaust
gases contain dangerous carbon
monoxide.
2. Never use the product,
a. when the ground is slippery
GB-4
until you completely under-
stand and follow all safety and
operating instructions.
that you may refer to it later
whenever any questions arise.
Also note, if you have any
questions which cannot be
answered herein, contact the
dealer from whom you pur-
chased the product.
manual when selling, lending,
or otherwise transferring the
ownership of this product.
one unable to fully understand
the directions given in the
manual to use the machine.
protector
area (rope, warning signs)
emergency)
obstacles)
or when you can't maintain a
steady posture.
b. At night, at times of heavy fog,
or at any other times when
your field of vision might be
limited and it would be difficult
to gain a clear view of the
working area.
c. During rain storms, during
lightning storms, at times of
strong or gale-force winds, or
at any other times when
weather conditions might
make it unsafe to use the
product.
WORKING PLAN
1. You should never use the product
when under the influence of alco-
hol, when suffering from exhaus-
tion or lack of sleep, when suffer-
ing from drowsiness as a result of
having taken cold medicine or at
any other time when a possibility
exists that your judgment might
be impaired or that you might not
be able to operate the product
properly and in a safe manner.
2. When planning your work sched-
ule, allow plenty of time to rest.
Limit the amount of time over
which the product is to be used
continuously to somewhere
around 30 ~ 40 minutes per ses-
sion, and take 10 ~ 20 minutes of
rest between work sessions. Also
try to keep the total amount of
work performed in a single day
under 2 hours or less.
WARNING
1. If you don't observe the working
time, or working manner (See
"USING THE PRODUCT"), Re-
petitive Stress Injury (RSI) could
occur.
If you feel discomfort, redness
and swelling of your fingers or any
other part of your body, see a
doctor before getting worse.
2. To avoid noise complaints, in
general, operate product be-
tween 8 a.m. and 5 p.m. on
weekdays and 9 a.m. to 5 p.m. on
weekends.
NOTE
Check and follow the local regula-
tions as to sound level and hours of
operations for the product.