Storage; Disposal - Zenoah LRT2300 Owner's Manual

9. Maintenance
INTAKE AIR COOLING VENT
WARNING
• Check the intake air cooling vent after every 25
hours of use for blockage, and remove any waste
which has attached itself to the machine.
IMPORTANT
• If waste gets stuck and causes blockage around the
intake air cooling vent, it may cause the engine to
overheat, and that in turn may cause mechanical
failure on the part of the machine.
(1) Plug guard
(2) Cylinder fin
(3) Intake air cooling vent
(back)

10. Storage

• Aged fuel is one of major causes of engine starting
failure. Before storing the unit, empty the fuel tank
and run the engine until it uses all the fuel left in the
fuel line and the carburetor. Store the unit indoor
taking necessary measures for rust prevention.
• Oil the blades.

11. Disposal

• When you dispose of the machine, do not disas-
semble the machine.
• When you dispose of the machine, fuel, oil, be sure
to follow your local regulations.
LRT2300
G
B
GB-13