Maintenance Procedures - Hammer Strength Linear Leg Press Owner's Manual

4. MAINTENANCE PROCEDURES

ACTION
CLEAN
Upholstery
Guide Rods
Shields
Hand Grips
Frames (Wax)
INSPECT
Hardware
Frame
Hand Grips
Paint
LUBRICATE
Guide Rods
CLEAN
•
Upholstery with a mild soap and water.
•
Guide rods with a cotton cloth and break-free.
•
Hand grips with mild soap and water.
•
Wax frames with a standard, non-abrasive, wax finish.
INSPECT
•
Hardware should be checked for looseness. Tighten as required using metric tools.
•
Frames should be inspected for wear or damage.
•
Handgrips should be checked for wear or damage.
•
All paint chips should be filled immediately with touch-up paint.
DAILY MONTHLY BI-ANNUALLY YEARLY
X
X
X
NEEDED
X
AS
X
X
X
X
X
X
4-1