Registering Web Contents - Epson TM-T83II Technical Reference Manual

Registering Web Contents

To register a web content in this product, the following methods are available:
• Manual Update: Web contents are registered manually by using EPSON TMNet WebConfig.
• Automatic Update: Web contents are saved in the Web server and automatically updated by the
product referring to the files periodically.
Manual Update
1. Connect this product to a network
Connect this product to a network and turn on the product.
2. Start EPSON TMNet WebConfig
Access the address bar of the Web browser on the PC for setting to start EPSON TMNet WebConfig.
http://"TM-i's IP address"/webconfig/
For detail, see "Starting EPSON TMNet WebConfig" on page
3. Register the Web contents
From [Update Settings] in the [Web Service Settings] menu, register the Web contents to this product.
Click [Browse...], specify the zip file to be registered, and then click [Upload].
For detail, see "Web Service Settings - Web Contents - Update Settings" on page
Automatic Update
1. Connect this product to a network
Connect this product to a network and turn on the product.
2. Start EPSON TMNet WebConfig
Access the address bar of the Web browser on the PC for setting to start EPSON TMNet WebConfig.
http://TM-i's IP address/webconfig/
For detail, see "Starting EPSON TMNet WebConfig" on page
3. Set automatic update of Web contents
From [Update Settings] in the [Web Service Settings] menu, set automatic update of Web contents.
Select [Enable] from "Automatic Update".
Configure the settings such as the update frequency and timing of Web contents and the URL of the
server where the file to be obtained is stored.
After setting, click [Apply] at the bottom of the screen. Then the settings are written to the product. If
[Apply] is not clicked, the settings are not applied.
For detail, see "Web Service Settings - Web Contents - Update Settings" on page
Chapter 2
72.
85.
72.
85.
Setup
2
61