Figure 3. Input Signal Connector; Figure 4. Input Signal Cable; Figure 5. Bifurcated Audio Signal Cable - PESA Tiger Owner's Manual

,QSXW 6LJQDO &RQQHFWRUV $ ,13876 % ,13876
These 3-contact connectors provide the input signal interface. See Figure 3 for an orientation view showing
contact locations.
The INPUT connectors are connected to the audio signal sources with cables constructed with 3-contact
connectors (Part No. 81-9029-0811-0) and shielded, twisted-pair audio cable (Part No. 81-9028-0043-2,
Belden 8451, or equivalent) as shown in Figure 4.
The connector body has an integral strain relief which requires the use of a nylon cable tie (Part No.
81-9021-0028-8).
[ 6LQJOH&KDQQHO &RQILJXUDWLRQ
A dual-channel 144x144 routing switcher may also be configured as a 144x288 single-channel routing
switcher. This is done by bifurcating the input cables as shown in Figure 5.
&KDSWHU  ± ,QVWDOODWLRQ
7LJHU $XGLR 5RXWLQJ 6ZLWFKHU

Figure 3. Input Signal Connector

Figure 4. Input Signal Cable

Figure 5. Bifurcated Audio Signal Cable