Gabarron RF3P Installation Instructions And User Manual page 8

DAILY PROGRAMMES
It is basic to visualize the day split into 48 intervals of 30 minutes each; SUN, MOON, or
The default settings include daily mode so that the heater will repeat the program every day. If different programmes are required along a week,
please see the next step WEEKLY PROGRAMMES. To check a programme or to make a new one follow these steps:
PRG
Press the key and the display will show
OFF (frost protection) from 00:00h to 00:30h. If SUN or MOON temperatures are selected the relevant luminous indicator will be lit. If OFF
T
temperature is selected both luminous indicators will be off.
+
Press the key to go to the next interval. The display will show
to allocate SUN, MOON or OFF (frost protection) from 00:30h to 01:00h or press
Repeat these steps allocating the desired temperatures levels over the 24 hours of the day. Press the
23:30
period. By reaching the
PRG
At any time key can be use also to store the program and return the previous mode.
SUN
MOON
T
OFF
00:00 01:00 02:00 03:00
EXAMPLE
Let's see an example of how to introduce a
program with the above distribution of
temperatures.
OFF from 24:00h to 7:30h in the morning.
The heater will be on only if the temperature
drops to 3ºC.
SUN temperature from 7:30h to 9:00h.
MOON temperature from 9:00h to 13:00h.
SUN temperature from 13:00h to 15:00h.
MOON temperature from 15:00h to 19:30h.
SUN temperature from 19:30h to 24:00h.
Inertia Electric Radiators
00:00
intermittently. Press one of the three keys
in the display and pressing
04:00 05:00 06:00 07:00 08:00 09:00
1 - Press
2 - Press
3 - Press
4 - Repeat steps 2 and 3 until display shows:
5 - Press
6 - Press
7 - Press
8 - Press
9 - Press
10 - Press
11 - Press
12 - Press
13 - Repeat steps 11 and 12 until display shows:
14 - Press
15 - Press
16 - Repeat steps 14 and 15 until display shows:
17 - Press
18 - Press
19 - Repeat steps 17 and 18 until display shows:
20 - Press
21 - Press
22 - Repeat steps 20 and 21 until display shows::
23 - Press
24 - Press
T
temperatures can be allocated to any of them.
00:30
intermittently and, again, press one of the three keys
+
key directly if the existing temperature level is ok.
+
key the controller will store the program and will return to the previous mode.
10:00 11:00 12:00 13:00 14:00 15:00
PRG
T
+
key
+
key
+
key
+
key
+
key
+
key
+
key
+
key
+
key
8
T
to allocate SUN, MOON or
–
key at any time to modify a previous
16:00 17:00 18:00 19:00 20:00 21:00
00:00
00:30
07:30
08:00
08:30
09:00
09:30
13:00
13:30
15:00
15:30
19:30
20:00
23:30
GRAB
T
22:00 23:00 24:00
Off
On