1.- WARNING
The warranty of the heater will not cover any damage caused by non observance of any of these instructions.
•
This guide must be kept and given to any new owner.
•
Please check that the voltage in the rating label fits the power supply.
•
Any reinstallation should be carried out by trained personnel.
•
The use of these heaters is forbidden in any area where there is a presence of gases, explosives or inflammable objects.
•
DO NOT USE THIS HEATER TO DRY CLOTHES.
•
The surfaces of this heater can be hot, so young children should not be left unsupervised in the vicinity of the heater.
•
Children should be supervised to ensure they do not play with the appliance.
•
Neither the connecting cable nor any other object must come into contact with the hot unit.
•
Do not cover this heater at any time.
•
The air outlet at the top of the thermal radiator and the air inlet at the bottom are provided to ensure the most efficient operation
•
of the appliance. They also protect the heater from overheating; therefore, it is essential that at no time are they covered.
This heater should be switched off at the isolating switch before any repair work is carried out.
•
The thermal radiator should not be installed just below an electrical socket.
•
The appliance must be installed in such a way that it is impossible for anyone using a bath or shower, to touch the controls.
•
The installation must be carried out in accordance with the current electrical regulations.
•
The heater is fitted with a flexible cable size 3 x 1.00 mm2 for electrical connection. It may be used to connect the heater to the
•
fixed wiring of the premised through a suitable connection box positioned adjacent to the heater.
The supply circuit to the heater must incorporate a double pole isolating switch having a contact separation of at least 3 mm.
•
If the flexible power cable for this unit is damaged, it may only be replaced by a repair workshop recognised by the manufacturer,
•
as special tools are necessary.
This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and
•
knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible
for their safety.
This appliance must be earthed.
•
All models are supplied with an electrical interrupt cut-out. This will switch off the heater if, for any reason, it overheats. Should
•
the cut-out operate, turn the heater off and remove the cause for the overheating. The cut-out will be reset automatically.
The presence of air particles of smoke, dust and other pollutants could, in time, discolour the walls and surfaces around the
•
heater.
This heater is filled with a precise quantity of special oil. Repairs requiring the opening of the oil container are only to be made by
•
the manufacturer or his service agent who should be contacted if there is an oil leakage.
Regulations concerning the disposal of oil when scrapping the appliance have to be followed.
•
MODELS
MODULES
W (cm)
D (cm)
H (cm)
WEIGHT (kg)
VOLTAGE
INPUT (W)
Inertia Electric Radiators
INSTALLATION INSTRUCTIONS
RF3P
RF4P
RF5P
RF3F
RF4F
RF5F
RF3E
RF4E
RF5E
3
4
33.5
41.5
49.5
10 plus 2 cm separated from the wall
7,5
9,5
11,5
375
500
625
RF6P
RF8P
RF6F
RF8F
RF6E
RF8E
5
6
8
57.5
73.5
58
13,5
17,5
220-240V~
750
1000
2
RF10P
RF12P
RF10F
RF12F
RF10E
RF12E
10
12
89.5
105.5
21,5
25,5
1250
1500