ASSEMBLY STEP 3
HARDWARE BAG FOR STEP 3 CONTENTS :
A) Open HARDWARE BAG FOR STEP 3.
B) Slide the CONSOLE MAST BOOT over the bottom of the CONSOLE MAST.
C) Carefully pull console wires through the CONSOLE MAST. Attach the CONSOLE WIRES to the pre-attached
routing wire. Discard wire when finished.
D) Slide CONSOLE MAST into MAIN FRAME.
E) Insert 3 BOLTS (C), 3 LOCK WASHERS (D) and 3 ARC WASHERS (E) into back of CONSOLE MAST.
F) Attach CONSOLE MAST to MAIN FRAME using BOLT (B) using NUT (F).
G) Slide CONSOLE MAST BOOT down to cover exposed bolts.
8