fitness gear 820E User Manual page 11

ASSEMBLY STEP 
HARDWARE BAG FOR STEP  CONTENTS :
A S S E M BLY ST E P 8
820E
CONSOLE WIRES
CONSOLE MAST
A) Open HARDWARE BAG FOR STEP 7.
B) Insert SPACER (Q).
C) Insert 2 TEFLON WASHERS (P)
between LINK ARM and LOWER
HANDLEBAR BRACKET.
D) Attach UPPER HANDLEBARS to
LOWER HANDLEBARS using PRE-
ATTACHED SCREWS.
D) Attach LINK ARM to LOWER
HANDLEBAR using BOLT (N) and
NUT (O).
E) Repeat on other side.
NOTE: There is NO hardware bag
for this step. All hardware is pre-
installed.
CONSOLE (830E)
A) Attach the CONSOLE WIRES.
B) Carefully tuck the CONSOLE
MAST wires into the CONSOLE
MAST before attaching the
CONSOLE.
PRE-ATTACHED
SCREWS
C) Attach CONSOLE to the
CONSOLE MAST using the
4 PRE-ATTACHED SCREWS
(screws will have to be removed
from the console first).
DO NOT PINCH WIRES!
11