Repair Work; Covers And Frame; Removing/Installing The Top Cover - Invacare Pronto M41 Series Service Manual

SERVICE MANUAL
8

Repair work

8.1

Covers and frame

IMPORTANT!
After any adjustments, repair or service and before use, make sure that all attaching
hardware is tightened securely - otherwise injury or damage may result.
● Before performing any maintenance, adjustment or service verify that ON/OFF switch on the
joystick is in the OFF position.
● To prevent cracking the plastic cover material, do not overtighten the mounting screws.
8.1.1

Removing/Installing the top cover

Requirements:
● Slotted screwdriver
● Phillips screwdriver
Removing the front cover:
● Disconnect the joystick, as described in chapter 8.2.3.
● Remove the seat assembly, as described in chapter 8.9.1.1.
● Remove the two screws (2) that secure the top cover (5) to the frame.
● Remove the two screws (2) that secure both the top cover (5) and front cover (1) to the
frame (3).
● Remove the top cover (5) by pulling the top cover forward then up in order to clear the motor
release levers and seat post.
36
®
Invacare - PRONTO M41