SERVICE MANUAL
1
Introduction
These instructions contain information about:
Testing work
Repair Instructions
1.1
General information
●
Service and maintenance work must be carried out taking this service manual into account.
●
It is imperative that you observe safety information.
●
Information about operation or about general maintenance and care work on the mobility aid
should be taken from the user manual.
●
You can find information about ordering spare parts in the spare parts catalogue.
●
Only use original Invacare
are used!
●
We reserve the right to make any alterations on the grounds of technical improvements.
●
The mobility aid may only be maintained and overhauled by qualified personnel.
●
The minimum requirement for service technicians is suitable training, such as in the cycle or
orthopaedic mechanics fields, or sufficiently long-term job experience.
- Experience in the use of electrical measuring equipment (multimeters) is also a requirement.
- Special Invacare
●
Alterations to the mobility aid which occur as a result of incorrectly or improperly executed
maintenance or overhaul work lead to the exclusion of all liability on the side of INVACARE.
●
If you have any problems or questions please contact Invacare
1.2
Notes on transport
●
If the mobility aid has to be shipped back to the manufacturer for major repairs, you should
always use the original packaging for transport.
●
Please attach a precise description of the fault.
6
®
spare parts. The guarantee will become invalid if other spare parts
®
training is recommended.
®
Invacare
- PRONTO M41
®
Service.