On-Screen Service Menu - Sanyo DP42841 Service Manual

Table 1. ON-SCREEN SERVICE MENU
When IC7600 (Flash Memory) is replaced, check the bus data to confirm they are the same as below. See page 3 for
On-Screen Service Menu access and adjustments.
Index ParameterName
02 OP1
03 OP2
NOTES: Option 2 Data (Display Panel)
Option 1 and Option 2 data is initial and can be set according to adjusment information.
PROGRAM CODES
The microprocessor used in this model is a multi-purpose type and is used in several different models. To ensure
proper operation and the correct features for your particular model, the program codes must be correct.
Note 1. Option Data 1 (NO. 02 OP1) should be hexadecimal 00.
See 02 above. If this program code is wrong the TV will not operate properly.
Note 2. Option Data 2 (NO. 03 OP2) should be hexadecimal 03.
See 03 above. If this program code is wrong the TV will not operate properly.

ON-SCREEN SERVICE MENU

Value Min
00h 0
03h 0
Max
255
255
– 4 –