Service Adjustments - Sanyo DP42841 Service Manual

GENERAL
This set has an On-screen Service Menu system included in
the CPU that allows remote operation for most of the

service adjustments.

ON-SCREEN SERVICE MENU SYSTEM
1. Enter the Service Menu:
•
Turn off the receiver and disconnect the AC power
supply.
•
While pressing the Volume (
sion, reconnect the AC power supply. The Service
Menu will now appear. The remote can now be used
to make adjustments. See Figure 1 below.
TITLE
ITEM NO.
Index ParameterName
1 FACTORY_VOL
Figure 1. Service Menu Display
2. Service Adjustments:
Press the Cursor L and M key to select the desired
•
service menu item you want to adjust. See page 4 for
the On-screen Service Menu.
•
Use the Cursor
The or key will increase or decrease the data
sequentially.
3. Exit from the Service Menu:
•
Press the MENU key to turn off the Service Menu
display.
SERVICE ADJUSTMENTS
– –
) button on the televi-
HEX DATA
Value Def. MIN
0x21 48 0
or key to adjust the data.
Menu:
Exit Service Menu
Cursor
Adjust the data
Volume –
MAX
255
INFO
:
– 3 –
:
Enter Service Menu
SUB CH
DYN VOL
Cursor LM:
Select Item