Chapter 3 Network Settings
The below menu will help you to configure advanced settings in Router menu.
3.1.1. Network Setup
Ethernet LAN Setup
Ethernet WAN Setup
1.
LAN IP Address: The local IP address of this device. The computers on your network
must use the LAN IP address of this device as their Default Gateway. You can change it
if necessary.
2.
Subnet Mask: Input your Subnet mask. (All devices in the network must have the same
subnet mask.) The default subnet mask is 255.255.255.0.
3.
WAN Interface: Select Ethernet WAN or Wireless WAN to continue.
4.
WAN Type: WAN connection type of your ISP. You can click WAN Type button to
choose a correct one from the following options:
22