Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Life Fitness 3 Tier Dumbbell Rack
Summary of Contents for Life Fitness 3 Tier Dumbbell Rack
- Page 1 3 Tier Dumbbell Rack Owners Manual...
-
Page 2: Tools Required
3 Tier Dumbbell Rack 1. Assembly Instructions Item Description Tier Left End Right End 3/8 x 67mm Bolt 3/8 Washer 3/8 RH Washer 3/8 Lock Nut Black RH Cap RH Cap Tools Required: 9/16 Wrench Ratchet - 9/16 Socket Rubber Mallet... - Page 3 LOOSELY assemble the three TIERS (1) between the LEFT and RIGHT ENDS (2 & 3) starting with the bottom tier, using twelve 3/8 X 67mm BOLTS (4), twenty-four 3/8" SAE WASHERS (5), twenty-four 3/8" RH WASHERS (6), twelve 3/8" LOW HT LOCK NUTS (7), twelve BLACK RH CAPS (8) and twelve frame color RH CAPS (9).
-
Page 4: Proper Usage
3 Tier Dumbbell Rack 2. Safety & Warranty It is the sole responsibility of the purchaser of LIFE FITNESS products to instruct all individuals, whether they are the end user or supervising personnel on proper usage of the equipment. It is recommended that all users of LIFE FITNESS exercise equipment be informed of the following information prior to its use. -
Page 5: Warranty
WHO PAYS TRANSPORTATION & INSURANCE FOR SERVICE If the Product or any covered part must be returned to a service facility for repairs, We, Life Fitness, will pay all transportation and insurance charges for the first year. You are responsible for transportation and insurance charges during the second and third years (if applicable). -
Page 6: Exclusive Warranty
3 Tier Dumbbell Rack 2. Safety & Warranty EXCLUSIVE WARRANTY THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF ANY KIND EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND ALL OTHER OBLIGATIONS OR LIABILITIES ON OUR PART. -
Page 7: General Specifications
A 10-year minimum warranty on structural frames (excluding surface finish) and 90 days on any items not specified. Liability Insurance Certificate of insurance available upon request Product Specifications 3 TIER DUMBBELL RACK Product # CSDB3T Size: in = 27L x 50W x 34.5H... -
Page 8: Maintenance
3 Tier Dumbbell Rack 4. Maintenance INSPECT Hardware should be checked for looseness. Tighten as required using 9/16 wrench and 9/16 socket. Frames should be inspected for wear or damage. All paint chips should be filled immediately with touch-up paint. - Page 9 2005 Life Fitness, a division of Brunswick Corporation. All rights reserved. © Life Fitnessis a registered trademark of Brunswick Corporation. CSDB3T 6.15.05 7888001 RevA...