Quick Reference Guide
Allocating Cameras
button at the bottom. The Setup – Recording Service window
1. Select a recording service and click the
appears. Select the Device Setup tab.
The list of cameras registered on the current recording service is displayed. Clicking the Add button at the
bottom allows you to register additional cameras on the current recording service.
NOTE: If you remove a device for which some recording has been done and register the device again, the
NVR system considers the device as a new device. In this case, you can search or play back video recorded
→
→
before the device was removed as follows: go to the Play panel
click the
(Additional Menu) button
select Removed Devices.
16