Becker PROFESSIONAL 50 Operating Manual page 49

Selecting a house number
After entering the destination town and
street, you can enter a house number so
as to further limit the choice.
Note:
Instead of entering the house number,
you can also enter a junction. However,
it is not possible to enter both at the
same time.
> Press the button.
No.
The input menu for the house number
will appear.
> Enter the house number and then
press the button.
Displaying the route
Once the address has been entered, the
address input menu allows the route to
the destination to be displayed on the
map.
> Press the button to display
Show route
the route on the map.
The route is calculated.
You can start the route guidance directly
from this screen using the
Start
The other options on this screen are
described under "Displaying the whole
route" on page 97.
Storing a destination
In the address input menu, the
button opens a menu where a name can
be entered for the specified destination.
If the desired name has been entered
and has been pressed to accept it,
the destination is transferred to fast
access mode and protected.
Starting navigation
The button starts the route
Start
guidance.
All data entered thus far is processed
when calculating the route.
> Press to start the route guidance.
Start
button.
The route is calculated. The map will
then be displayed and the route guidance
will begin.
NAVIGATION MODE >>>
Save
> D
> GB
> F
> I
> PL
49