Ending A Call - Becker PROFESSIONAL 50 Operating Manual

>>> TELEPHONE MODE
If you have switched on the automatic
call acceptance
> D
"Automatic call acceptance" on page 117,
> GB
the time to call acceptance is also
displayed for the
> F
> I
> PL
114

Ending a call

as described in
You can end an active call.
button.
Accept > In the call screen, press the
The call is ended. The screen last active
is displayed.
Note:
The call is also ended if the other party
hangs up. The screen last active is also
displayed.
button.
During a call
During a call, you have various control
options.
End call
In the call display, the signal strength of
the cell phone, the charging level of the
cell phone, the telephone name and the
network provider are displayed if availa-
ble in the upper area.
Beneath, the call time and, if available,
the phone number or name the name of
the other party are displayed.
If route guidance is active, then you will
receive the navigation instructions with
arrows on the call screen.
Note:
If during a call there is another incoming
call, this is not indicated. But the number
of the caller is displayed in the number
list.