The Basic Unit - Becker PROFESSIONAL 50 Operating Manual

>>> THE NAVIGATION DEVICE

The basic unit

The basic unit consists of the complete
> D
electronic unit:
> GB
• Integrated antenna
• a TMC receiver for receiving traffic
> F
messages (depending on the model),
> I
• Touchscreen
• an integrated loudspeaker
> PL
• a microphone (dependingon the
model).
On the side of the unit, there are also
various connections and ports.
You will find more details of the unit
under:
• "Model overview and technical
specifications" on page 140
12
Cable for power supply from cigarette
lighter
This cable allows the unit to be connect-
ed up to the car's cigarette lighter.
The power supply must satisfy the
follow- ing requirements:
• DC current 12/24 volts
0.3 amps
Battery
When depleted, the
rechargeable battery can be recharged
by connecting the Navigation device to
the power supply.
For this purpose, connect the unit via a
car power adapter to a 12/24 V socket in
a vehicle or via the optional mains power
supply unit to the 230 V mains.
Note:
You can charge the Navigation device
via the car charger cable included in the
scope of delivery or via the optionally
available mains power supply unit.
When the Navigation
connected to a PC, it is supplied with
power via the PC and does not consume
battery power.
USB connection cable
With the USB connection cable provided,
it is possible to connect the Navigation
device to a standard PC with a USB
interface. The integrated flash memory
of the navigation device and a micro SD
card that may eventually be inserted can
then be addressed by the PC like a
removable storage device.
Unit bracket
integrated
The Navigation device can be mounted in
the vehicle using the unit bracket.
Accessories
Mains power supply unit
This power supply allows connection of
the Navigation device to a mains outlet.
The power supply must satisfy the
following requirements:
• Alternating current 100-240 volts
0.3 amps
50-60 Hertz
device is