Replacing The Battery - Becker PROFESSIONAL 50 Operating Manual

Connecting the remote control to the
Navigation device
Connecting for the first time
> Switch on the Navigation device.
1
> Press the button on the remote
1
control.
The connection to the Navigation device
is established.
Notice:
The car adapter cable with radio remote
control receiver must be connected to
the cigarette lighter and navigation sys-
tem and be supplied with power. The ra-
dio receiver is in the plastic case on the
cable.

Replacing the battery

If the Navigation
responding to commands from the
remote control, the battery in the remote
control is probably dead.
2
Danger!
¤
3
Keep the battery away from children.
Consult a doctor immediately if a child
swallows a battery.
Batteries must not be dismantled,
short-circuited or thrown into a fire.
Environmental note:
Batteries must not be disposed of in
household waste.
It is the legal duty of the user to return
used batteries. You can hand in your old
batteries free of charge at local
municipal collection points or wherever
batteries are sold.
> Remove the remote control as
described above.
*depending on model, must be activated via the Content Manager
> Remove the old battery and replace it
with a new type CR2032/DL2032
device stops
battery.
> Place the remote control back onto the
base plate.
> Reconnect the remote control to the
Navigation device as described above.
GENERAL OPERATION
33
>>>
> D
> GB
> F
> I
> PL