Appendix B: Safety And Regulatory Information; Important Safety Information - Kodak 7000 User Manual

Appendix B: Safety and

Important Safety Information

Regulatory
Information
CAUTION
:
Use of controls or adjustments or performance of procedures
other than those specified in this manual may result in injury
and/or damage to the printer.
• The power outlet should be easily accessible and installed near the
printer.
• Position the power cable so that it cannot be pulled on or tripped over.
• Never allow the power cable to contact hot surfaces.
• The power outlet must be grounded. An ungrounded outlet can cause
fire, electric shock, or harmful interference to nearby electrical devices.
• Use only the power cable provided with the printer.
• Do not operate the printer with a damaged power cable.
• Always unplug the power cable from the printer before cleaning or when
the printer is not in use.
• If the printer has been dropped or damaged, make sure a qualified
service person examines the printer before you use it.
• Do not block the filter openings on the printer cabinet.
• Do not expose the printer to moisture or water.
• Do not allow any foreign objects or liquids to fall or spill inside the
printer. Fire or electric shock could result.
• The thermal print head becomes extremely hot during normal operation.
Do not touch it.
• Alcohol pads are used to clean the thermal print head and other internal
printer components. In the United States for health, safety, and
environment information, call 585-722-5151. Customers outside the
U.S. can contact KODAK Service and Support.
B-1