PART # DESCRIPTION ACUAP04-0047 FRAME ACUAP01-0083 3 X 2 X 18” TUBE ACUP02-0044 DUMBBELL CHANNEL 3102922 3/8 X 2-3/4” BOLT 3102905 3/8 X 3-3/4” BOLT NOTE: BOLT LENGTH IS MEASURED FROM THE UNDERSIDE OF THE HEAD OF THE BOLT. PARTS LIST Tools Required for Assembly * Rubber mallet or hammer * 9/16”...
Page 3
4 3/8 X 2-3/4” BOLT 3/8” LOW HEIGHT LOCK 5 3/8 X 3-3/4” BOLT 3/8” SAE WASHER WASHER RH CAP (BLACK/WHITE/PLATINUM)
Page 4
FIGURE 1 3/8 X 2-3/4” 4 STEP 1: • SECURELY assemble the two 3 X 2 X 18” TUBES (2) to the FRAME (1) using eight RH CAPS (10), four 3/8 X 2-3/4” BOLTS (4), eight 3/8” SAE WASHERS (7), eight 3/8” RH WASHERS (8) and four 3/8” LOW HEIGHT LOCK NUTS (6) as shown in FIGURE 1.
Page 5
FIGURE 2 3/8 X 3-3/4” 5 STEP 2: • SECURELY assemble two DUMBBELL CHANNELS (3) to the FRAME (1) using six BLACK RH CAPS (9), three 3/8 X 3-3/4” BOLTS (5), six 3/8” SAE WASHERS (7), six 3/8” RH WASHERS (8) and three 3/8” LOW HEIGHT LOCK NUTS (6) as shown in FIGURE 2.
There is a risk assumed by individuals who use this type of equipment. To minimize risk, please follow these rules: 1. Inspect equipment daily. Tighten all loose connections and replace worn parts immediately. Failure to do so may result in serious injury. 2.