Using Your Workcentre Blade - Morphy Richards Total Control Instructions For Use Manual

402054 REV4.qxp_Layout 1 05/06/2015 13:50 Page 7

Using Your Workcentre Blade

Place the Workcentre Blade
the Bowl (14).
WARNING: Blades are sharp.
Align the tabs on the Lid
the Bowl. Place the Lid and Pusher
the Bowl. Push down to lock.
Select speed 6 or 7 on the Speed Control
and press and hold the Precise Control Trigger
(2) to start. Do not open the Lid while in use.
Pull the Lid Release Handles
and remove the Lid.
1
(15) on the shaft in
3
(13) with the slots on
(11) onto
5
(1)
7
(12) to unlock
Place the food into the Bowl. Do not exceed
the maximum level.
Push the Main Unit (4) onto the Lid. The Main
Unit will not lock into place for safety reasons.
When finished, Release the Precise Control
Trigger and lift the Main Unit from the Lid.
CAREFULLY remove the Workcentre Blade
before emptying the Processor Bowl.
2
4
6
8
7