The Sp1A Programmer - Handicare Raptor Service Manual

SP1A
The following table summarizes the full compatibility between the SP1a versions and
the Solo, Egis, and S-Drive controllers.
Function
Forward Acceleration
Forward Deceleration
Reverse Acceleration
Reverse Deceleration
Max Fwd Speed
Min Fwd Speed
Max Rev Speed
Min Rev Speed
Invert Throttle
Sleep Timer
Read System Log
Read Timer
1 Not Controllers manufactured before Sept 2002
2

The SP1a Programmer

The SP1a is a handheld programmer for use with PG Drives Technology Solo, Egis and
S-Drive controllers. Primarily intended for general purpose use, it can set all of the key
controller speed, acceleration and braking characteristics, and allows different settings
to be tried out while the programmer is still plugged into the controller.
The programmer is a menu-driven device which plugs directly into the controller and
has a context-sensitive help function available to guide users through the menus. The
SP1a can also display error messages from the controller which allows any problems
with the vehicle electrical system to be identified and corrected quickly.
The SP1a takes advantage of the programmability of the controller, offering functions
not available with less sophisticated controller designs.
4
Controller Compatibility
Solo Egis
(1)
SP1a Version
S-Drive D50040
All
All
All
All
All
3 Onwards
All
3 Onwards
All
All
3 Onwards
3 Onwards
PG
DRIVES TECHNOLOGY
D49371
All
All
All
All
All
7 Onwards
All
7 Onwards
All
All
7 Onwards
7 Onwards
SK73762/6