Revox S119 User Manual page 82

network receiver
N
ETWORK QUESTIONS
The S119/S120 finds my Access Point,
however my computer is not displayed.
• Make sure you have installed an UPnP
server on your computer and that this
is also activated. Depending on the
amount of data and the software, it can
take a few seconds before the option
appears as a selection on the
S119/S120.
• You have activated a MAC address
filter on your router. In this case, add
the S119/S120 MAC address to you
router configuration.
• Your router only assigns fixed IPs.
Deactivate DHCP and enter in this
case, a fixed IP address in the
S119/S120.
My Access Point (SSID) is not listed.
• The S119/S120 can only find your
Access Point if it is within range.
Reduce the distance to the Access
Point and try again.
• Depending on the configuration, the
router's SSID may be hidden. If this
option is activated, the SSID must be
entered manually in the S119/S120
Network menu.
80
/
TIPS
N
ETWORK QUESTIONS
A lot of Access Points are displayed that
are unknown to me.
If several Access point, for example
those installed in neighbouring buildings
are available to the S119/S120, these will
also be listed. Select your Access Point
and continue with the configuration.
The S119/S120 indicates to me that my
network is encrypted.
Your network is protected against
external attacks with an encryption
(WEP / WPA(2)). Enter your key in the
S119/S120 Setup so that the S119/S120 is
identified as a "User" in the network.
Where do I get my key from?
If you installed your network yourself,
you will have defined it as part of that
work. Otherwise, you will get it from your
System Administrator.
Can other data on my network hard disc
or server by read or viewed?
No, the S119/S120 can only receive data
that is released by the UPnP server. In
this way, the S119/S120 only accesses
your files. Other data on your server is
not transferred and cannot be viewed.
Questions & Tips
/
TIPS