Alarm Clock 1 / 2 - Revox S119 User Manual

network receiver
 Alarm Clock
1 / 2
The S119/S120 network receiver has two
independent alarm clocks (1/2) that can
be set simply and intuitively.
Using the navigation compass, you can
set the switch-on time, the sound
source, the wake-up volume [max.
volume 40] as well as the days of the
week when the receiver should wake
you up.
The following options are available as
the sound source:
• Alarm sound; classical beep
• Radio (iRadio, FM Tuner*, DAB+*)
• Audio server
• USB
• iPod
• My Music (No. 1-18)
With all sources, except the alarm
sound, you must ensure that the source
is available at the preset time. If the
S119/S120 identifies that it is not possible
to play the
automatically selects one that is
58
desired source,
available. If none of the audio sources
can be played, the alarm sound is used
as the last option.
The weekday selection is done simply by
using the  buttons and OK. The blue
bar indicates the currently selected
day. The day can be activated with OK. A
large icon with a blue border indicates a
day when the alarm clock will operate. A
small black & white icon indicates a day
when the alarm clock will remain silent.
In the example shown here, the alarm
clock is active on Tuesday, Wednesday,
Thursday and Friday and is switched off
on the other three days of the week.
You can use the Test option to check the
alarm clock setting in terms of the
volume and the source and correct them
if necessary. Selecting OK ends the test.
Otherwise, the test stops automatically
after 30 seconds.
Deactivating the alarm clock
In the "Switch-on time" line, you can
activate/deactivate the alarm clock
through the OK button.
The two icons
towards the bottom of the S208 display
show which alarm clock is currently
active.
The Status LED on the network receiver
shows permanently red
switched off if an alarm clock is active.
it
* with optional DAB+/FM Tuner module
Operation
in the status line
after being
