network receiver
Initial login
You must register your network receiver
in order to be able to use the IAP
service. Registration is done using the
MAC address of your S119/S120, your e-
mail address and a password that you
define yourself.
Please enter the MAC address of your
S119/S120 when making your initial login.
This uniquely identifies your network
receiver. You can display the MAC
address by calling the following menu:
Press the
Basic settings Network MAC
address (see figure to the right).
Alternatively, you can read off the MAC
address from the label on the rear of the
device (see figure below).
66
button briefly Device
The MAC address is made up of six pairs
of characters, e.g.: 00:1A:2B:6D:08:15.
Don't
enter
the
inputting the address and do use lower-
case letters. For the example shown
above, the correct input in the IAP would
be: 001a2b6d0815
Internet Audio Portal
separators
when