Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Revox S119
Summary of Contents for Revox S119
- Page 1 Introduction network receiver E 1.7...
-
Page 3: Table Of Contents
Store in a cool environment ....16 IP Settings ..........35 Total discharge protection ....16 WLAN Settings ........36 Useful facts: Revox Joy radio system ..16 Network Restart ........36 MAC Address ........36 Quick start function ......36 Software........ - Page 4 Initial login ..........66 Copyright advice ........82 IAP Registration page ........ 67 Environmental protection ......82 Managing the Revox IAP......68 Technical data 1/2 ........83 Adding radio stations to Favorits ....69 Technical data 2/2 ........84 Synchronising Joy devices ......70...
-
Page 5: Welcome
For the benefit of audiophile music lovers, Revox deliberately avoided the use of fans. So that nonetheless, the S119/S120 can keep a cool head, even when the temperatures outside top the 40°C mark, a heat coupler has been used. -
Page 6: Setup
Appendix. the chapter “Technical Data” section. Scope of delivery Fuse The S119/S120 is equipped with a Network receiver (1x) primary fuse located inside the housing. Power cable (1x) This internal fuse may not be changed by ... -
Page 7: Installation - Safety Advice
Do not expose the device to splash loops. With these network receivers water or high levels of humidity. Do not however, Revox uses the ground cable stand containers filled with liquid, e.g. for the reduction of noise fields. For flower vases, on the device. -
Page 8: Safety Measures
In order to exclude the risk of an electric has high humidity shock, do not remove the housing. Only have repair work carried out by a Revox The guarantee covers the intended specialist dealer. usage of the unit. -
Page 9: Regulations Pertaining To The Unit
Introduction network receiver Regulations pertaining to the unit In EU and EEC countries, Revox offers a guarantee on units bought in the EU, over and above the statutory rights of guarantee claims against the seller. The guarantee covers material and labour... -
Page 10: S119/ S120 Front Panel
(RF) for the bidirectional data traffic with behind the glass panel on the front of the the optional S208 remote control. The unit, the S119/S120 should be installed so unit is controlled through the S208 that it is aligned in the direction of the remote control. -
Page 11: Display Colours: Status Led
Revox App. automatically after a certain time. Power consumption: approx. 4.5 W* The USB input supports the charging of White ... -
Page 12: S119/ S120 Connection Panel
USB information DAB+/ FM combiner information Revox recommends that you only use the A DAB+/FM combiner is needed for the USB connection for data carriers up to parallel reception of DAB and FM signals 32 GB as with large data quantities, the through the tuner module's F socket. -
Page 13: Explanation Of The Connections
(iRadio, NAS) and App control, supplied with the unit not supplied with the S119/S120 Switch off the S119/ S120 via Power switch – Press and hold the Factory button. Switch the device back on with the power switch. Release the Factory button after 5 seconds... -
Page 14: S208 Remote Control
S208. receiver. The operation of the S119/S120 using the Lithium battery information S208 Remote control is described in the The remote control, with the battery in it, next chapter. -
Page 15: S208 Overview
Presentation network receiver S208 Overview... -
Page 16: Explanation Of The Remote Control
Main menu with source selection (radio, USB, local sources, etc...) Access to (basic) settings. Short press: S119/S120 settings (only if there is already a connection to the receiver) Long press: S208 settings Displays the information screen about the currently selected source... -
Page 17: Charging The Battery
Presentation network receiver Charging the battery Charging control / status display S208 remote control rechargeable lithium ion battery that can Battery is being charged - be charged using either the supplied do not interrupt the charging process charger or a mini-USB connection. Battery is fully charged - Use the charger with the supplied USB charging process can be ended... -
Page 18: Battery Care
10% to 100%. For this reason, it no polling at short intervals. makes sense to charge the remote only The S119 / S120 is the off-mode only in a once the charge-level display is showing receiving mode, which means that he [Almost empty] or [Empty]. -
Page 19: S208 Basic Settings
Configuration network receiver S208 Basic settings Remote control The Basic settings for the S208 are Name [Re:control S208] called up by pressing and holding the Time: Hours (0-23) [13] button for > 2 seconds. Time: Hours (0-59) [45] Stand-by (0-300) [60] Time in cradle [On]... - Page 20 network receiver Configuration Background colour Time in cradle [On] / [Off] Five colours are available as background The S208 Remote Dark grey / Walnut / Blue / Red / colour: control can display Moss green. On the one hand, this gives the current time you the option of choosing a colour that [On], when it is in...
- Page 21 Configuration network receiver Change language Add zone Here, you can select the remote Zones can be added and named through control's menu language. You can this menu. In the simplest case, a choose between: English, German, Zone/Room consists of one network French, Italian, Spanish, Dutch.
-
Page 22: Select Device
S208 remote control and they are assigned to a zone or not. The the network receiver, in order that they devices can be S119/S120 network can communicate securely with each receivers or third-party devices that are other again after a restart or power controlled by infrared (IR). -
Page 23: First Contact
First contact Power cable Various connections have to be made Only use the power cable supplied by before setting up your S119/S120 for the Revox. It must also be ensured that the first time. voltage value printed on the type plate... -
Page 24: Establishing The Connection To The Network
S119/S120 makes wireless communication between the assumption that there S119/S120 and the router. This can be an functioning network with router available external unit or it can be integrated in and that the network is operational. the WLAN router. -
Page 25: Establishing The Connection To The Remote Control Using Pairing
The first step - Establishing the connection to the remote control using pairing The picture below shows the pairing All the functions of the S119/S120 process between the S208 and a network receiver are controlled through network receiver. You will find an exact the S208 remote control. -
Page 26: Establishing The Connection To The Remote Control
You can switch the S119/S120 on directly by pressing the hotkey on the remote control with the name S119 or S120. In the example on the right, that would be hotkey A. Carrying out a pairing with a new S208... -
Page 27: First Steps In The Main Menu
OK button. and comfort functions of the Revox network receiver, we would invite you to get to know all the details and nuances through our User manual. -
Page 28: Radio Not Available
• The network cable to the router is not plugged in or a crossover network cable has been used. • As a factory setting, the S119/S120 is set to DHCP, which means that it gets its IP address automatically from the router. -
Page 29: S119/S120 Basic Settings
The S119/S120 receiver must have a wireless connection to the S208 in order for basic settings to be made and it must have been selected as a device, e.g. over the corresponding hotkey. -
Page 30: Speaker Setup
Needless to say, future models will For the development of the DSP system, be made available for selection through Revox measured current a software update. As soon as a Revox Re:sound speakers their speaker is selected, this is indicated characteristics under studio conditions... - Page 31 Through the third menu item, you define whether an active subwoofer with its Revox solution own output is connected to the The S119/S120 Pilot function solves this S119/S120. switch-on problem by overlaying the low-frequency subwoofer signal with a [Off] 10 kHz signal with a higher level.
-
Page 32: Fm Tuner
network receiver Configuration FM Tuner Automemory The Automemory function searches for If the optional DAB+/FM Tuner module is all receivable stations and then stores installed, this menu can be used for them in ascending order of their searching for, sorting or deleting tuner frequency. - Page 33 Configuration network receiver Delete Sort The station list is displayed after calling Stations can be sorted in the Station list. the "Delete" option. The stations to be The corresponding stations are selected deleted can be selected with the "Up" with the "Up" and "Down" buttons and and "Down"...
- Page 34 network receiver Configuration Scan Display FM tuner [ ] The Scan selection opens an Info menu The broadcasting sector changes and and the scan process starts with the with it, our preferences change. If you / button at the lower frequency don't want to or can't use the FM tuner, range.
-
Page 35: Dab
Configuration network receiver DAB+ Carrying out an automatic station search If the optional DAB+/FM Tuner module is deletes all previously stored stations. installed, this menu can be used for The system advises of you this fact searching for, sorting or deleting DAB+ before starting Automemory, in order to stations. - Page 36 network receiver Configuration Sort Display DAB+ tuner [ ] Stations can be sorted in the Station list. The broadcasting sector changes and The corresponding stations are selected with it, our preferences change. If you with the "Up" and "Down" buttons and don't want to or can't use the DAB+ highlighted with...
-
Page 37: Network
• Encryption Network name-ID As the factory-setting, each Joy receiver IP Settings identifies itself inside a network as S119 Here you can choose whether you want or S120. If you are deploying several to assign a fixed IP address or whether... -
Page 38: Wlan Settings
In the case of a manual input, you can MAC Address make the following settings: Display of the MAC address that has IP Address been uniquely assigned to this S119/ Subnet mask S120. Gateway IP DNS Server 1 Quick start function... -
Page 39: Software
USB stick. Do not put the bin file in a sub-folder. Plug the USB stick into the USB socket on the back of the S119/S120 and start the update with the OK button. NTFS-formatted USB sticks are not If you want to update your S119/S120 recognised by the S119/S120. -
Page 40: Remote Access
Normally, the network receiver gets its commands from UPnP Control points are time setting from the Internet. In order accepted. This means that the S119/S120 that it can display the right time for your can be externally controlled through the location, with or without daylight saving, network (LAN/WLAN), e.g. -
Page 41: Auto Standby
Configuration network receiver Auto Standby The automatic standby function can be activated through this menu. In this way, the network receiver is automatically switched to standby mode if the network connection is interrupted for more than 5 minutes or the playback from USB/iPod media is ended. -
Page 42: Operation - Start-Up Process
Switch the S119/S120 on directly by pressing the hotkey on the remote control with the name S119 or S120. In the example on the right, that would be hotkey A. Alternatively, if no hotkey is... -
Page 43: The Configuration Options
S119/S120 network receivers + IR devices) are assigned. receivers: This can, for example, be an S119 that plays the sound from a connected One S208 can control a maximum of 24 television. Both devices (S119 + TV) different devices. These devices can be would be assigned to the "Living room"... -
Page 44: Operation
Operation The next pages give you information All the functions and information from about the individual sources and the the selected S119/S120 network receiver additional functions. are shown on the S208 remote control colour display. The picture below shows The functions and content are displayed... -
Page 45: Main Menu
Operation network receiver Main menu The main menu is called with the button on the remote control and displays the source overview and the "Last listened to": Last Music My music Radio USB/ iPod Audio Server ... -
Page 46: My Music
network receiver Operation My Music The My Music selection covers all your favourite stations or tracks that you have added through the button [Add to My music]. These can be stations or podcasts from the Internet radio or they can be tracks and playlists from a USB stick or a network drive. -
Page 47: Shortening Access Times
As a rule this is a call that is made through the Favourites list that you Online Services) create in the ( option in the Revox Internet Audio Portal (see Page 59). Path: Internet Radio > Favourites > Favourites Group A good alternative without the Internet Portal is: Path: Internet Radio >... -
Page 48: Radio
network receiver Operation Radio • Internet Radio Selecting Radio gives you two options to The selection Internet Radio gives you choose from: access to thousands of radio stations • Last Music available from around the world. As well • Internet radio as the linguistic diversity available, you •... - Page 49 • Genres • Podcasts By Location Device location (country) • Podcasts By Genre Your S119/S120 knows which country it is • New Stations in through its IP address. Using this • Most Popular Stations information, it offers the user direct access to the selection of national radio stations.
- Page 50 network receiver Operation Genre Listing of radio stations based on certain music genres, such as rock, jazz, folk, etc. Within the genre, the individual radio stations are either listed alphabetically All Stations ) or by the countries offering this type of music. ...
- Page 51 If the station doesn't have its own station logo, the S119/S120 shows a default logo [130 x 130 pixels). If the station does have its own station logo, the S119/S120 shows the egg-timer icon until the logo is fully available. (130 x 130 pixel).
-
Page 52: Dab+ / Fm Tuner
network receiver Operation DAB+ / FM Tuner FM Tuner/ DAB+ Status menu If the Joy Receiver is equipped with a DAB+/FM Tuner module, the DAB+ or FM Tuner selection appears. Status info with RDS FM Tuner Station name (PS= Programme Service Name) ... -
Page 53: Usb/ Ipod
Connect the Apple product (see next access to devices/content connected to page for Apple product list) with the the S119/S120's USB input. That can be S119/S120 using a USB cable as shown either an iPod or iPhone from the Apple in the figure below. -
Page 54: Ipod Selection
network receiver Operation iPod selection At the time of printing this manual, the following selection criteria were available with Apple products: • Playlists • Artists • Albums • Songs • Podcast • Genres • Composers • Audiobooks Use the navigation buttons to make your The selection displayed only reflects the choice. -
Page 55: Audio Server
Important : Music folder name Twonky Vision with software The S119/S120 can only find your music TwonkyMusic display tracks on the media server if they are selection menu of such an UPnP-AV located in a folder called Music. Other server can vary greatly. -
Page 56: Control Functions
network receiver Operation Control functions Cover display for USB/iPod/Music server The network receiver supports cover display with the iRadio, USB and Music Play server selections. In the case of iRadio, the station logo from the broadcasting Pause organisation is sent automatically. Stop Track forwards/back Fast forward/ - backward... -
Page 57: Local Inputs
Operation network receiver Local inputs The selected source is shown in the The S119/S120 offers 6 local inputs of display. Each source name can be which 4 are digital inputs. renamed in order to provide better The following inputs are available on the orienteering - see next page. -
Page 58: Rename Input
Operation Rename Input The S119/S120 offers the option of After you have renamed an input and assigning freely definable names to its confirmed the change with the OK analogue and digital inputs. You no button, it is displayed in the Play view as... -
Page 59: Settings And Comfort Functions
Settings and comfort functions Sound Setting The S119/S120 offers a wide range of In this menu, you can raise and lower the comfort functions to make the daily base and treble settings in the range of ±... -
Page 60: Alarm Clock 1 / 2
The Status LED on the network receiver is available at the preset time. If the shows permanently red after being S119/S120 identifies that it is not possible switched off if an alarm clock is active. play desired source, automatically selects one that is... - Page 61 Operation network receiver Switching the alarm clock off When the receiver switches on at the preset receiver turned time, there are 3 options when it comes to automatically using the Sleep timer turning it off: (see page 54) prior to the alarm clock being activated.
-
Page 62: Short Time Alarm
Operation Short Time Alarm Using the S119/S120's timer, you can enjoy a short nap or a siesta. Start up the network receiver as usual and select a music source. Now using the the timer, you can define how long it should be before the S119/S120 switches itself back on again. -
Page 63: Sleep-Ttimer
Music menu. Also, the complete My define. This function is ideal for getting Music list can be deleted in this menu. the S119/S120 to send you off to sleep. Edit Name The time shown as the Remaining time Select the option "Edit Name". The My indicates how many more minutes the Music list is displayed. - Page 64 Internet access, may be programmed with a specific this folder will transfer automatically to entry in the range from 1 - 18. your S119/S120. You will find the folder in the Internet radio Favourites selection Internet (see also page 40, Chapter...
-
Page 65: Device Info
Operation network receiver Device info Basic settings The S119/S120 network receiver is The Basic settings menu offers all those controlled by 3 micro-processors that settings that are not needed every day, handle different tasks, e.g. network e.g. automatic... -
Page 66: Setting Up Internet Radio
The list of radio stations that appears in This is done as follows: Open your the Internet Radio section of your Internet browser and call the Revox S119/S120 is made available by a service Homepage under: provider and transferred to your network www.revox.de... -
Page 67: Internet Audio Portal - Iap
( ) if your S119/ S120 is already registered. If this is not the case, you can register with little effort. How to do this is described in the Initial login next chapter: Revox Internet Audio Portal start page... -
Page 68: Initial Login
You must register your network receiver in order to be able to use the IAP service. Registration is done using the MAC address of your S119/S120, your e- mail address and a password that you define yourself. Please enter the MAC address of your ... -
Page 69: Iap Registration Page
IAP under the section: Register for online newsletter If required, you can subscribe to the My account free-of-charge Revox Newsletter, which My preferences is sent by e-mail. To do this, you just have to complete the corresponding fields and set the checkbox in the... -
Page 70: Managing The Revox Iap
Internet Audio Portal Managing the Revox IAP Once you have registered, you can make Currently, you can make selections on a selection for the extensive pool of the Internet Audio Portal according to radio stations and add it to the favourites... -
Page 71: Adding Radio Stations To Favorits
Internet Audio Portal network receiver Adding radio stations to Favorits Clicking on the in the station list adds the corresponding radio station to Internet the Favourites in the receivers Radio selection. This opens the window shown on the right where you can decide which favourite group the radio station should be added to or if you want to create a new favourites group for it. -
Page 72: Synchronising Joy Devices
Internet Audio Portal Synchronising Joy devices Several devices, different accounts If you own several Revox devices (S118, If you have generated several devices S119, S120, Multimedia Module from the with different accounts (e-mail address M series), you can synchronise your... -
Page 73: Error Messages
USB Apple that is no longer connected to the stick that has been removed from the S119/S120. S119/S120. The receiver tries for a few seconds to start the music. - Page 74 • The network receiver already has a cable has been used. wireless connection another • As a factory setting, the S119/S120 is remote control and therefore cannot set to DHCP, which means that it gets connect with your S208. its IP address automatically from the •...
- Page 75 Status displays network receiver • WLAN connection. WLAN antenna at the receiver / the WLAN router is not available. The WLAN function is deactivated at the router or the router is switched off. Network settings See Chapter WLAN status The Main menu is called by pressing the Home button on the S208.
-
Page 76: Status Messages
network receiver Status displays Status messages A. Switching the device on C. Switching the device off This display appears shortly after the The S208 remote control has switched network receiver is switched on. The the network receiver off and the wireless remote control is trying to establish a connection to it is interrupted. -
Page 77: Network Terminology
S119 192.168.001.001 Local Area Network NAS: 192.168.001.002 Local cabled network 192.168.001.003 A LAN connection to the S119/ S120 is the most fault-tolerant problem free If you don't just want to use devices within the local network but also music sources... -
Page 78: Client
NAS server contains an UPnP-AV server speakers. Streaming clients also contain service, the S119/ S120 can access and play media files that are stored on the NAS. Recommendations NAS functions for displaying media content and for navigating in the Internet or on servers. -
Page 79: Router (Wlan Router)
A UPnP-AV software must be installed on access point wireless data PCs /NAS storage so that the S119/ S120 can communication. These combi-devices are access the stored media data. often referred to as WLAN routers. Below, you will find a short overview of UPnP... -
Page 80: Wlan
WPA offers Pre- Shared Keys (PSK) for demonstrates the same weaknesses. authentication or Extensible Authentication Protocol (EAP) through IEEE 802.1x. Open Shared The S119/ S120 offers both WEP authentication. S119/ S120 based authentication PSK and supports both the WPA encryption TKIP and AES. -
Page 81: Network: Questions & Answers
Network: Questions & Answers ETWORK IS BUT THERE IS NO SOUND ETWORK QUESTIONS TIPS You should be aware that the S119/S120 The connection is lost after a few cannot support all data formats that are minutes: available on the Internet. It can occur System-based characteristic of the that a station cannot be played. - Page 82 If several Access point, for example server on your computer and that this those installed in neighbouring buildings are available to the S119/S120, these will is also activated. Depending on the amount of data and the software, it can also be listed. Select your Access Point and continue with the configuration.
- Page 83 Point-to-Point proximity, can also be received? If the S119/S120 is connected directly to a PC without using a router, cabling is done using a Crossover Cable. Distribution with Router If the S119/S120 is connected to the network through a router, a Patch cable (1:1) is to be used.
-
Page 84: Appendix
Sales Office. S119/S120 Please supply a complete description of Please note: The EU Directive the fault together with your address. 2002/96/EC governs the correct return, handling and recycling of used electronic devices. -
Page 85: Technical Data 1/2
80 dB 1 kHz, 1 Watt at 4 Ohms Harmonic distortion 0.005 % 0.005 % 25W at 4 Ohm S119/S120-S208 distances Open space Dimensions with feet 87 x 200 x 322 87 x 200 x 322 H x W x D... -
Page 86: Technical Data 2/2
Microsoft Windows Media Optional accessory The audio formats listed must be supported by the UPnP server so that the S119/ S120 can play them. It is not enough for the audio files simply to exist on the server Software Revox Joy S119/ S120: Version1.8... - Page 87 Appendix network receiver...
- Page 88 User manual Revox Joy S119 / S120...