Control Panels - Viking Range 5 series Installation Instructions Manual

Verify Operations

Control Panels

All Refrigerator
ACTIVATE REF
HIGHER
CONTROLS TEMP
All Freezer
ACTIVATE FRZ
HIGHER
CONTROLS TEMP
1. Press "Activate Controls" pad.
2. Verify unit is not in Sabbath Mode.
If in Sabbath Mode:
A. The Sabbath Mode will disable the interior lights, display (except SAB indicator, temperature and
compartment indicator) and alarm.
To exit the Sabbath Mode:
B. Press and hold "Activate Controls" and then "Display Off" for 3 seconds.
(The control will beep three times to alert the user the Sabbath Mode has been exited.)
3. Verify unit is not in Showroom Mode.
If in Showroom Mode:
A. The Showroom Mode will disable the refrigerator system but all other functions are normal.
These include lights and control. (If the refrigerator is in Showroom Mode, SHOW will be lit.)
To exit Showroom Mode:
B. Press and hold "Activate Controls"; while holding, press and hold "Higher" and "Alarm Off"
together. (The control will beep three times to alert the user that Showroom Mode has been
exited.)
4.Press "Activate Controls" then press and hold "Lower"; while holding, press and hold "Display Off"
and hold until beeps (force start compressor).
5. All models need to be set at 38° F and 0° F for the Refrigerator and Freezer respectfully - factory
setting.
FREEZER
MAX FRZ MAX REF
LOWER
FAST COOL
SAB SHOW
FREEZER
MAX FRZ MAX REF
LOWER
FAST COOL
SAB SHOW
45
REFRIGERATOR
F
C
DOOR OPEN
FAST
COOL
POWER
HIGH TEMP
REFRIGERATOR
F
C
DOOR OPEN
FAST
COOL
POWER
HIGH TEMP
MAX ALARM DISPLAY
REF OFF OFF
MAX ALARM DISPLAY
FRZ OFF OFF