Programming A Personal Entry Code - Ford Taurus 2015 Owner's Manual

Hide thumbs Also See for Taurus 2015:

Table of Contents

You can use the keypad to:

You can operate the keypad with the factory-set 5-digit entry code.

The code is located on the owner's wallet card in the glove box and is

available from an authorized dealer. You can also create up to three of

your own 5-digit personal entry codes.

Programming a Personal Entry Code

To create your own personal entry code:

1. Enter the factory-set code.

2. Press the 1•2 on the keypad within five seconds.

3. Enter your personal 5-digit code. You must enter each number within

five seconds of each other.

4. For memory recall feature, enter the sixth digit 1•2 to store driver 1

settings or 3•4 to store driver 2 settings.

Note: Pressing 5•6, 7•8, or 9•0 keypad numbers as a sixth digit will

not recall a driver memory setting.

Note: The factory-set code cannot be associated with a memory setting.

5. The doors will lock and then unlock to confirm that programming is

Owners Guide gf, 2nd Printing, November 2014

• lock or unlock the doors

• open the trunk

• recall memory features

• enable or disable the autolock

and autounlock

• arm and disarm the anti-theft

alarm (if equipped)