Memory Function; Programming A Memory Position; Recalling A Memory Position - Ford Taurus 2015 Owner's Manual

Hide thumbs Also See for Taurus 2015:

Table of Contents

MEMORY FUNCTION (if equipped)

The memory control is located on the side seat panel.

This feature will automatically recall the position of the following:

• Driver seat.

• Power mirrors.

• Optional adjustable pedals.

• Optional power tilt and telescopic steering column.

1. Switch the ignition on.

2. Adjust the memory features to your desired positions using the

associated controls.

3. Press and hold the desired preset button for about two seconds until

you hear a single tone.

You can save up to two preset memory positions. You can save a memory

preset at any time

Press and release the desired memory preset button to recall a saved

memory position.

You can recall a programmed memory position:

• In any gearshift position if the ignition is not on.

• Only in park (P) or neutral (N) if the ignition is on.

Owners Guide gf, 2nd Printing, November 2014

Troubleshooting